Hi Em,

I've got to ask the question, why did you purchase a 20 inch catcher when all your machines are 17 inch models ?

Also there is a special process you have to go through when painting fresh zinc alume (Galv)as straight primers will just not adhere to the repelent surface. If I recall correctly you'll have to use a light acid prewash (oxidene) to destroy the smooth glossy surface and then use an etch primer shortly after, prior to final colour being applied.

Read the folowing article and it pretty much explains it all.

http://www.gaa.com.au/index.php?page=surface-preparation

Cheers,
BB.

I live a 24 Hour lifestyle, but every now and again I seem to fall asleep, well at least that's what my wife tells me.