Thanks for the feedback guys.

Re the coil clearance I set it at first with a business card and then reset to 0.25mm as per the flywheel notes using a filler gauge. I will revisit and have a look.

Relocated Ignition Module (Now sitting under Carby) - http://imgur.com/k4J2K1P

Coil Spark Plug Wire Reading OK - http://imgur.com/6CMZy41

Off Wire Reading OK - http://imgur.com/MPG3Np1

On Wire Reading OK - http://imgur.com/eV6tg5p

Connected positive as ground, then negative. I can feel the charge (tingle) when i hold the spark plug wire but not spark.

Scratches head frown