OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions on Greenfield Ride On Mower Frames Greenfield MkII Evolution Ride-on - Wiring

prd

I've wired up the switch to the Honda solenoid.

Here are the pics in no particular order.

With reference to those bundle of wires, there was only two, one is red with half a fuse connector at the end. I found the other half of the plastic connector chewed up.

The other wire is coloured sort of white (covered by a shield cloth(, that's the one going to the Magneto so I've attached that one to the Magneto terminal on the key switch.

L is not used and not connected.

The other terminal on the Key Switch away from the others is another Earth / Ground terminal.

I have not colour corrected the cables as yet. I have temporarily used the existing wires as they are.

At this point in time I have not placed any fuse on the power supply until I work out what amp would be suitable.

Cheers, Bondy

Here are the pics.