BB, the project is going well, there unfortunately is a massive knowledge gap with these mowers. frown

Currently the mover is looking like this

[Linked Image]


Totally stripped down and going through replacing all the bearings, which are std off the shelf at auto parts stores and CHEAP, about $4 each.

the front roller takes 6101
the drive shaft takes 6202
the rear drum takes 6303

While i don't want to pinch bits from such a complete mower it does have a few issues including no catcher.

I needed 1x clutch arm from the donor and all of the drive gears. Due to not replacing the bearings in my 20" frame the gears have worn down.

[Linked Image]

Let me know mate and i appreciate your help.

Any tips let me know.

Rear drum bearing carrier

[Linked Image]