Aram,

1. Remove the 4 screws on clutch housing.

2. Remove the screw in the centre of the clutch drum (you will need a T20 screw driver).

3. Remove clutch (this has normal thread so undo anti-clock wise).

4. Remove 4 screws on cover holding starter on.

5. Remove 1 screw holding eyelet in for starter cord and then remove starter pulley.

6. Replace rope and reassemble.

Good luck. cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.