OutdoorKing Repair Forum Forums Restoring, Customising and Modifying Tech Talk Ultrasonic cleaner project.

Not sure how this will be received.
But, I am putting together an ultrasonic cleaner.
Thought someone may be interested.

I don't clean a huge quantity of carburettors, but I want a more passive way of doing it.
I also want to limit my exposure to carb cleaner.

I could have just bought one, but what I have noticed is:
a cleaner advertised as 100W, may be 50W heating & 50W ultrasonic power.
So adverts can be deceiving.

I got the idea of using an old deep fryer from "Roebuck".
Cheers, it should work a treat.

So for $2 at the recycle centre, here it is.


The kit I bought is a generator circuit card and 2 x 50W 40kHz transducers.
Basically, 240 Vac supplies the board.
The output from the board powers the 2 x transducers that get attached under the cleaning vessel.



The Card I mounted up in an insulated enclosure.


I'm not sure how it will work when its finished, but I will let you know.