Bill A,
I have sent you a parts list on the brushcutter. This might be of some help.

As to the removal of the starter, just follow these steps:

1. Remove the four screws wher the shaft housing is mounted to the engine and then remove the shaft.

2. Remove the spark plug and place a length of starter cord in the cylinder towards the exhaust port(muffler).

3. Then undo the clutch and remove the starter housing.

Let me know how you go.

Regards,

Bruce [Linked Image]

[This message has been edited by Bruce (edited 02 October 2005).]

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.