Hi Walter P
Glad you have the SB45 bug as well.
I'm not sure if I can mention business names on this forum under the rules.
However if you send me a private message from under the My Stuff section I can give you details.
I can say though I am doing my own spray job and finishing.
Really just getting the sandblasting and chrome work outsourced.
The green hammertone I am using is Hammerite Dark Green Hammer Finish. Most good paint stores have it.
Although I got mine from Masters hardware. It can be sprayed or brushed on. I am spraying at a mix of 15% Thinners to 85% Paint.
I am spraying 3 to 4 coats to build up the hammer finish deeper. It seems to be working. I am not a spray painter by any stretch but am loving the challenge and learning of it all.
Please send through some photos of your mower
