rod4655,

1. Sounds like the needle is sticking in the carby.

2. The main jet could be partly blocked.

3. Check the hole in the fuel cap as it also could be blocked.

4. If the mower is old the seal in the bottom bearing could be leaking.

5. If old motor the rings could be worn.

Use the search button and type in carby information and links.

This will give you information on the carby.

Thanks,

Bruce [Linked Image]

[This message has been edited by Bruce (edited 10 February 2006).]

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.