I have a Victa Power Torque V160.
However, it recently started dieing after running for about 5 mins.
I removed and cleaned the fuel tank, lines, filters, jet, needle and cleaned the plug.
Initially, it restarted fine, but then two problems emerged.
Firstly, the throttle response is almost non-existence. It either runs Flat out or Stop with very little range in between. This particular model has a rev optismiser and should normally run at about 40% with no load.
Secondly, the initial problem remains. The engine dies after a brief period of running, and will only retsart after a 30 min break.
Any suggestions ?
alidad
