Hi tezza98_tnharris,
Originally Posted by tezza98_tnharris
New bolts as well since they are rusty, and some new decals and finally some engine paint
Tezza, I would presume that most of the original nuts and bolts would be Imperial sizes (ie. SAE or A/F) some of which maybe hard to source but you could try this link: Click HERE
As for early Scott Bonnar decals and stickers, they are impossible to get at present; if the one on your catcher is OK, try and preserve it by careful masking, before painting.
For the engine paint, Repco have a spray can of heatproof engine enamel in orange that is very close to the original B & S colour.
Hope this is of some help,
cheers2

Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member.
Kindest Regards, Darryl grin