Originally Posted by TJ1
Hi All,

I recently purchased a 20' SB 45. It is the older type model 45 with a one piece (bolted on) top deck. The rear roller is in 3 pieces - 2 standard rollers as per a 17' and 3' piece in the middle.

Does anyone have any advice on how to get the rear roller bearing and bearing housing off on the non drive end?

TJ1 you will have to remove the sprocket on the left side in order to remove the roller. cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.