Originally Posted by grumpy
He says fill the old no-dipstick engines (prior to about 1982 I think) right up to the top of the oil filler hole thread. I've always filled mine to the bottom of the thread, which is about a centimetre below the top. Is he right, or am I?

If you measure 600ml of oil and then put it in to the engine (after removing old oil) you will find that the oil level will come up to the top of the thread. cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.