Below is a parts list for the the trimmer which should help you identify part positions etc.
Now as to the fuel filter line you don't need to worry about cutting the fuel line so you can get it out of the tank.
1. Remove fuel filter from the tank 2. Get a lenght of fuel line and push it through the hole in the tank until you have enough showing through the petrol cap hole 3. Then place the new fuel line onto the fuel filter. 4.After that pull the fuel line out so the fuel filter goes back into the tank. This will take a bit of pulling and once the spout is through the tank place the plastic washer over the fuel line and let it go to complete the seal.
Hope that this helps.
Last edited by Bruce; Yesterday at11:07 PM.
Regards,
Bruce
Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.