Hi niggz,

If you have connected the wiring up correctly it should run but if connect incorrectly you will not have any joy.

Take a close look at the paper in the image to make sure that you have everything correct also you need to run the wires from th module under the e plate otherwise you will have issues because if they get to close to the magnets in the flywheel they could rub and the earth out.

Try doing a check and give us an image with the wires connected to the module which should be two.

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.