Hello everybody, I am wanting to do a service for this gun pictured and have found out it needs hydraulic oil in a small bore in the gun body you pour in via the piston bore that opens up at the bottom. Can anybody tell me the correct grade and where to get a small quantity as it appears to only need a thimble sized amount. Can anybody advise how high to fill it to as there is limited info on the web? One YT vid says to fill up beyond the small hole and up to a mark on the piston bore and another (in Indian) shows it filled only to what looks like about 3mm below the top of the small bore hole as you have the gun inverted. I bought a tube of silicone grease for the rubber edged piston that runs up and down the bore that drives the gun. Do you smear all over the bore wall or just smear a bit on the rubber? Thanks.
Last edited by Mowerfreak; 10/02/2105:56 PM.
Ahh, if only victa had kept producing the thumblatch catcher series, they would be in better shape today!
