Moving the Choke in Run Position Is Stopping the engine

If they are the carburetor to engine mounting you should use the Briggs 690953 as they have both 3/8" and trox heads. It makes it easier to install and remove one of the screws but the other is always a pain to remove and to install. The style used a hex with a double slot.

I am thinking they are 1/4" x 3/4"L normal coarse threads.

Entire Thread
Subject	Posted By	Posted
Moving the Choke in Run Position Is Stopping the engine	Shannon	27/02/20 12:37 AM
Re: Moving the Choke in Run Position Is Stopping the engine	NormK	27/02/20 04:36 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	28/02/20 09:55 AM
Re: Moving the Choke in Run Position Is Stopping the engine	AVB	27/02/20 01:23 PM
Re: Moving the Choke in Run Position Is Stopping the engine	NormK	28/02/20 11:55 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	04/03/20 04:07 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	04/03/20 04:32 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	15/04/20 08:40 AM
Re: Moving the Choke in Run Position Is Stopping the engine	NormK	15/04/20 08:50 AM
Re: Moving the Choke in Run Position Is Stopping the engine	AVB	15/04/20 08:50 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	16/04/20 12:06 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	22/04/20 02:22 AM
Re: Moving the Choke in Run Position Is Stopping the engine	NormK	22/04/20 04:38 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	22/04/20 09:24 AM
Re: Moving the Choke in Run Position Is Stopping the engine	NormK	22/04/20 09:40 AM
Re: Moving the Choke in Run Position Is Stopping the engine	AVB	22/04/20 11:50 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Shannon	23/04/20 02:58 AM
Re: Moving the Choke in Run Position Is Stopping the engine	Mystyler	23/04/20 12:25 PM