Hi newbiedan, yes, that is him. Here is a pic of how it fits to the Scotty:
[Linked Image from i266.photobucket.com]

As you can see, the lower part of the assy goes thru the small hole on the mower side frame and attaches to the side rail of the front roller with a locknut; the upper part goes thru a hole in the cleat followed by the spring, (under the cleat) and lastly the handle...the plastic red button on the top of the handle is removed to allow a couple of drops of oil to keep the screw from seizing up. wink
Hope this helps, bet of luck with it

cheers2

Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member.
Kindest Regards, Darryl grin