OutdoorKing Repair Forum Forums Collectors Corner Cylinder SB45 14" rollar

Hi Guys ,

I have picked up a SB 45 14" rear roller in pieces.
Can any one please tell me which side the counter weight goes on ie. drive side or not

Cheers Ken

Hi Ken,

What counterweight ?

Cheers,
BB.

Hi BB,
It has a Counter weight that bolts to one side

Maybe Scott Bonnar put then into the 14" for extra weight on the drive side to stop slip ???
cheers Ken

Hello Ken and Mod BB

I attach an exploded view.
That 'Drum Weight' was certainly used on Models 450407 and 450431.
The 17" machine appears to have never used it.
The weight was attached to the RH side roller.

My parts manual says:
Drum Weight to Mach. No. 450995 the p/n was 453384
Drum Weight from Mach. No. 4504996 the p/n was 451590

Given that the part number changed (with the screws holding it),
I am guessing the weight was adjusted too - for unknown reasons.

Hope this helps.
---------------------------------
Jack

Hi Jack,
Again thanks for the info
Cheers Ken

I guess I've never had to pull a 14 inch Roller apart, only the 17's. You learn something new every day.

Thanks Jack and Ken.

Cheers,
BB.