scott & bonnar 45 Clutch body size

I have a scott & bonnar 45 with no engine and the Clutch body that suit 5/8" shaft
The Clutch body is an earlier unit with a cotter pin on it.

I also have a working kirby tecumseh engine 3/4" shaft

Can the Clutch body be resized to suit 3/4" shaft ?

Portal Box 6

Re: scott & bonnar 45 Clutch body size

alwood #44246 24/02/13 02:03 AM

Joined: Jul 2005

Posts: 6,362

Likes: 11

Wagga Wagga NSW Australia

Deejay

Administrator - Master Technician

Hi Alwood, I have never seen or heard of it being done personally, the design of the captive cotter may preclude it; I would consider consulting a professional engineer and see what he thinks.

I have just bought a new inner clutch half (5/8") for my Scotty 45 with the grub screws....I find them a much better fixing method than the captive cotter system....1 screw locks the PTO shaft key in position, and the other at 90 degrees onto the shaft itself.

To aid in cutter clutch adjustment, you can just slide the clutch assembly to the correct position and lock it down, and you're done. Easy-peasy!
Anyway Alwood, all food for thought.

Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member.
Kindest Regards, Darryl

Re: scott & bonnar 45 Clutch body size

alwood #45849 14/05/13 11:05 AM

Joined: Aug 2011

Posts: 2,998

Likes: 16

Adelaide, Australia

Bonnar_Bloke Offline

Former Moderator

Hi Alwood,

I'm looking for a 5/8 clutch body to replace a flogged out unit. Are you interested in selling it and then purchasing a 3/4 unit later ?

Let me know.

Cheers,
bonnar_bloke

I live a 24 Hour lifestyle, but every now and again I seem to fall asleep, well at least that's what my wife tells me.