OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Chainsaws and Concrete Cutters McCulloch Chainsaws McCulloch Power Mac 320 Owners Manual and Parts Manual

I recently acquired a Power Mac 320 which is not in running condition. I would like to find the owners and parts manuals for this model. Does anyone know of any websites that I can possibly download these manuals from? Any help would be greatly appreciated

William615

William615,

What does your serial number start with 11-12-14-15 or 16? As there is 3 different manuals.

Hello Bruce,
I appreciate your quick reply. I have spent a couple of days trying to track down these manuals via the internet and have had no luck so far...so perhaps this is my lucky day! There are 2 numbers stamped on this unit. The top number is 600021H. The bottom number is 11-052712 (I assume this is the serial #). This is my first time dealing with a McCulloch and I have a feeling it is going to be a real challenge. Looking forward to hearing back from you. Thanks again.

William615

William615,

I have uploaded the parts list for your machine to the Spare parts and manuals section of the board.

This area is available to members that support the board with donations to help with the cost of the upkeep.

Bruce,
Is there an owners/service manual that goes along with the parts list?

William615

William615,

It is a parts list and has some specifications in it.

Bruce,
I made a donation to your site today. I look at it as a good investment. To enter the parts and manuals forum it tells me I have to have a password. Help me out with that.

William615

William615,

You now have full access to all board areas. All you need is you user ID and your password.

Thank you once again for your support/donation.