|
|
|
1 members (Camdawson),
2,403
guests, and
253
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Dec 2009
Posts: 16
Novice
|
My Dad has asked for help regarding an LM carby on a victa 2 stroke.
When the fuel tap is turned on fuel leaks through the primer bulb. He replaced it with a spare LM carby with the same result. As the carbys could be (or probably are) well used, I just wanted to ask about what would be required to rebuild one.
Like a carby kit, or what parts would be needed to replace.
Thanks
|
|
|
|
|
Joined: Nov 2010
Posts: 121
Apprentice level 2
|
this sounds like the needle and/or float is misplaced or missing.
|
|
|
|
|
Joined: Jan 2010
Posts: 234
Apprentice level 3
|
either that or the primer face has not been placed horizontally on the carby body. There should be a line that states "this line horizontal" on the face which incorporates the primer bulb, make sure it is horizontally placed.
|
|
|
|
|
Joined: Dec 2009
Posts: 16
Novice
|
Thanks for the replies. I was going to try and pull the carby apart this weekend. I was going to get a carby kit anyway to put through it which seem to have a needle, o rings and cut out boots. Any ideas on the best place to get them?
|
|
|
|
|
Joined: Sep 2011
Posts: 1,374
know nothing
|
online store here is a great place , full kits and good advice 
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,007
Posts106,958
Members17,632
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
