OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames Emulsion tube

Bruce

I got the carby off (many thanks for the info) but did not find anything like the emulsion tube-is is a white plastic thing and can it get stuck in the black plastic where the jet screws into-if so how do I get it out? Also how can I tell if I need a new float needle?

Burnie

Bernie,
The needle will only need replacing if the carby is leaking or flooding into the cylinder.

If the tube is not on the end of the jet it does not have one.

Regards,

Bruce