OutdoorKing Repair Forum Forums Finding and Swapping To Trade 3 Push mowers with B&S engines

Hi All
Picked these up the other day, anyone need any parts.

Rover Craftsman

Model 35409

B&S
m.... 92908
t...... 2040-01
c..... 79052408

Electrolux Weed Eater

B&S
m.... 92908
t...... 5289-01
c..... 83060305

Rover Lawn King

Model 22403

B&S
m.... 92508
t...... 5155-01
c..... 89021704

Hi mich
good motors those old vertical pulls had any of them running?

Hi Norm

Haven't even got them out of the back of the ute yet, don't have much time to play with them at the minute, just looked to good to let go to landfill. Will see what I can do after chrissy if no one wants anything off them.

mich

Good haul of vertical pulls. They must ALL be saved!!
At least two are Magnetron electronic ignition models.
Plenty of primer tank carby sets out there to bolt onto these beauties. A lick of paint will have them looking a million..ok..a few hundred then...bucks!!

Hi All

Could anyone help.

The Rover Craftsman engine is not coming up in when I enter the numbers into the B&S manual finder.

anyone got any ideas.

m.... 92908
t...... 2040-01

Thanks for you help

mich

Hi All

The 3 mowers have been taken by a gentleman who wants some spares for his existing mower and to build a spare to lend to his neighbour so he doesn't have to lend his good one.

mich

That one is pre 1982 model so you need to use 092908-2040-99 to find the IPL. Also note the model is 9 cu in or less so a Zero is usually need to be added to the model number leading number. And models 1982 or older usually need the trim code changed to 99.

Just for future reference.

Thanks AVB