OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Edgers Two Stroke Edgers Progress pics Victa T-A-C

Hi to All,
Well I have been busy tinkering with the project, cleaning and painting....a wire brush and some silverfrost can work wonders, the handles have been repainted, and now the finishing touches are being applied. Here are some progress pics, I hope you enjoy






I will post the completed pics shortly.

Hey Darryl it would be good if I can see the pics of what you are doing.

Hey Bruce, you probably have seen this machine more than most, have a look at all the previously rusted parts, they have all been removed, cleaned and painted,like any conservation restoration , you really can't see what you've done, unless you have the before photo to compare it with.....but I have been busy and it is now finished!!The pics I posted are the "AFTER" pics as I was doing the various parts. BTW, it was a nightmare trying to get rid of the Armorall silicon so I could repaint.

PS. Could you check your PM's, I have not received an answer to the last. Thanks again, Bruce

sorry the pics are blank

john

Hi John2, I'll have to find out what's happening as the pics are appearing on my screen. Probably just a glitch, but I will find the prob and re-post the pics.

Darryl,

The reason that the pictures are showing up on your PC is they are on your hard drive and not loaded up on photobucket as I have had a look at your photo's and they are not up.

Hope that this helps.

Darryl,

I can now see the third photo but not the others, try uploading them again and see if it works.

gmax

Hi Guys,
There should be 5 pics showing now, can you see them all?
PS. Thanks to everyone for their help in getting this prob sorted......I really appreciate it.

Darryl,

All is working ok as I can see all 5 pic's.

Hey Bruce, thanks for your help in getting the prob sorted.
I now know what the prob was, I thought that once the pics were posted to the forum I could delete them from Photobucket, as I wouldn't need them on there any more.......
I now know differently!! Thanks again, mate, All pics are back!!