OutdoorKing Repair Forum Forums Restoring, Customising and Modifying Ride-On Mowers Project X - The Greenfield Experiment

Evening ODK members!

Work and family life has slowed down the progress on the project somewhat. This weekend i should be able to get a few things done.

I've started stripping the rear axle assembly, 30 odd years has this thing stuck firm together. A lot of penatrine, soaking time and also heat seen a start to disassembly. Will post some more pics of it broken down soon.

Also..I've decided to run a twin rather than a 4cyl. This is mainly due to physical size. The twin will still see the old square peg, round hole type issues BUT i feel this will better suit my end result better anyway.

That or opt for a late model, single cylinder, elec start engine. Ninja or CB250.

I've currently decided on a Hyosung engine, twin configuration, elec start etc. These also seem affordable and readily available with complete running bikes being under $1000. Exactly what i need.

I managed to pick this one up for $15, not a go'er but perfect to use for making the required mountings and initial install etc.

Chassis extension and rear axle set up is first priority and that will be tackled this weekend. Also a general chassis tidy up, removing any unwanted brackets and tabs etc, flapper disc and primer in required spots etc etc.

I'm also now on the hunt for another reasonably priced tractor for parts. Mainly body panels, alloy nose cone etc.