Hi Norm,
I took apart two PTs I was given last week.
One had good bore piston but worn rings and shot base.
The other was 30 years old...... rings seized in, but I got one out, it was good and used a Sabre Victa base that had a Briggs on it.
I like to take the rings off to decoke them.
and replaced front carby primer with another good one, new fuel lines....
I find all sorts of problems and missing parts, .
I didn't do the mod on this one yet, but I have done a few and they worked OK...
This one started after a few pulls. let it idle for a while , got low revs and higher revs.........
I'll have to mow a lawn to see how it goes, but looks OK nice solid base good wheels.....

But you have to check you have a spark........ visible or do the feel the plug test........... I don't do that one....

cheer all specially pau 13z
cheers
speedy
Bundy....
Our june rainfall is worst for 17 years......................................

Attachments
Power torque 001.JPG (136.11 KB, 103 downloads)
garden july 003.JPG (38.82 KB, 104 downloads)
power torque 001.JPG (108.67 KB, 103 downloads)

........................Keep your blades sharp......................