The engine/barrel exhaust gasket and under base plate gasket are of an unknown metal composite (copper lead alloy) and surely bound by asbestos. The small round base exhaust gasket is certainly Asbestos.
The fabric/fibrous small round exhaust base gaskets are the latest version and are crappy, usually requiring a few to take up the gap and compact tightly in the base flange. Even with the elongated hole on the inner exhaust flange pushed far forward, the clearance can still be to great.
The worst part of this whole system is the lack of provision for both barrel holes to be used. When the System is fully sealed,they are a reatively quiet mower,and tend to run smoother.
Yes the retainers that hold the handle bars to the base.
If you have another S1 base then for the other engine,then do that all original if you like
Naaaa orange is hideous.....Ice blue hammer, black handles and silver highlights....And flashing blue leds under the base. Ceramic exhaust, 8 inch slicks, electronic forced induction, flames, key start, lowered handles....skys the limit, Victa Drift Mower!
