Hi Gadge,

Thanks for the info on the clearances, does the manual also specify these in inches? I do know that for the points it is a 20 thousands gap.

However, I checked the B&S website and for model 80200 it says the clearances are within spec:

.005"-.007" (.13-.18mm) intake valve.
.009"-.011" (.23-.28mm) exhaust valve.

This is with the valve springs in place and the piston 1/4" (6mm) past TDC. Unfortunately, I didn't set the piston 6mm past TDC when I checked the clearances. The piston was flush.