OutdoorKing Repair Forum Forums Restoring, Customising and Modifying Victa Walk-Behind Rotary Mowers Victa Rotomo 2 Transitional Model.

Some progress Images,

Engine stripped and asessed...

As can be seen in the pictures, the piston is shot, as are the bearings and Small end bush. The crank is worn at the lower seal position, but saveable.

Electrics all came up good with exception of severly worn point contacts.

Engine rebuild,

Electrics tested, reset and good point set fitted.
Barrel recoed, tapped, and ports opened up.(model one ports are often severly restricted due to poor casting)

Good Sh crankshaft and bearings,
NOS Piston and rings 0.20
New small end bush
Gaskets and seals.

Anothe one saved and Will be a nice solid engine

2 more to save while im at it:) Model 4std And Model 2 Roto for spares:)