OK I'm back and I'm stoked, chech out the photos (heaps of em)first the over all.
[Linked Image]
[Linked Image]
[Linked Image]
Now the engine number.
[Linked Image]
[Linked Image]
badge in good condition, only a bit of overspray.
[Linked Image]
[Linked Image]
only 3 side extention bolts but they are complete with cups and springs.
[Linked Image]
[Linked Image]
And it does have oil nips, question how do the plugs come out are they just pushed in or threaded?
[Linked Image]
[Linked Image]
No slit.
[Linked Image]
[Linked Image]
Air cleaner/choke, has red writing.
[Linked Image]
[Linked Image]
Fuel cap is green.
[img]https://www.outdoorking-forum.com.au/forum/uploads/usergals/2013/06/full-6801-11299-cap_top.jpg[/img]
[img]https://www.outdoorking-forum.com.au/forum/uploads/usergals/2013/06/full-6801-11300-inside_cap.jpg[/img]
[img]https://www.outdoorking-forum.com.au/forum/uploads/usergals/2013/06/full-6801-11301-inside_cap_2.jpg[/img]
Cigar tap.
[img]https://www.outdoorking-forum.com.au/forum/uploads/usergals/2013/06/full-6801-11302-cigar_fuel_tap.jpg[/img]
Two cable carby.
[img]https://www.outdoorking-forum.com.au/forum/uploads/usergals/2013/06/full-6801-11303-2_cable_carby.jpg[/img]
Groove cover nuts and bolts.
[img]https://www.outdoorking-forum.com.au/forum/uploads/usergals/2013/06/full-6801-11304-groove_cover_nuts.jpg[/img]
the wheels are in very reasonable condition and will see how they clean up as I would like to keep as much of the original bits on it as I can, one hub cap is missing and one has had the center V rubbed off but thats no biggy, well I am very happy with the condition with the mower and it runs very well also, maybe just a brush up of the pionts and check the timing it should be sweet. that will do for now, I think the $150 was cheap.

If you dont make a mess you aint making anything.