Hello all, I have a Husq 254 that I am repairing. I have rebuilt the carb and done some other repairs also. The problem I am having is adjusting the carb correctly, a problem which I have not had before. I have reinstalled the carb, and had the saw running, it seem as if once it has cooled down, it is flooding the plug when I try to restart it. Even though I can get the saw to run nicely prior to stopping it, when I restart it the settings on the carb seem to no longer be correct and the plug is getting flooded. I have adjusted it extensively from one turn on the adjusting screws onwards. Any suggestions? or any advice in how to adjust the carb correctly so it will not flood the plug. Thanks in advance. KB