Thanks for the quick responses guys!
It appears that I had missed a few numbers from the engine ID the correct number are:

Model: 80202
Type: 0879 01
Code: 81110403

I have included some pics below, please let me know what you think.
It appears to be missing the little plastic part at the end of clutch assembly (on the frame side not engine side) which is strange.

My main concern at this stage is getting the engine running so I think that I will try and remove and clean the carby and fuel tank before anything else. I assume that I will need some gaskets to do this, is that correct?

As I said, I have had it run for a few seconds by putting petrol directly into the carby. Unfortunately I have just realised that there is no oil in the motor so I hope I haven't done any damage by doing this.

Considering there is no oil in the motor and no fuel in the tank, what should it sound like when I pull the starter? I pulled the starter a couple of times tonight and there seems to be a loud metal knocking noise of some sort. I also noticed that the reel turns a bit when I hear this knocking noise. Any ideas?

I also noticed that the blades on the reel are backwards compared to Salty's, is this an issue or doesn't it matter.

Thanks again,
Steve


[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]

Last edited by SteveV; 07/02/12 11:48 PM.