jesse43,

If the starter is on the side then all you have to do is take off the cowling (Cover)it will have two nuts on the cylinder head and another three on the side. Once removed you will have access to the flywheel which will be held on with one nut (13/16") then just use two screw drivers to lift it off (the points are below).

Let me know if this information is not correct as I think you are talking about a Victa that has the starter on the side of the motor. woot

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.