HI All

First off
1st topic post here so please forgive me if I stuffed up
Hope I go the right section for this post etc too

to cut a long story short I got given a badly unloved Honda
(now really it should just be scrapped and maybe keep the engine)

If I can, I'd like to get a new blade on this beast but the blade and the rest of it bits are pretty RS
The Engine seems ok but not sure
does blow a bit of blue smoke at startup
(maybe cause I've had it on it side trying to get the blade off
The self propelled side of it has long ago failed it seems too but no so worried on that)

I sprayed the bolts with WD40 and put Oil on them, have left them but still seems I need the hulk to move them and more likely that would cause more damage
(tried a few tapes on the heads with a hammer as well)

lastly the centre bolt is bend
(done ask me how they managed that)

I think this thing went bush bashing every weekend by the looks of it poor thing.. & still chugging along ..amazing

So any ideas suggestions on how I might achieve this would be welcomed

oh the set up
it is a disc with a full length blade
(2 bolts either side of a center bolt for the disc)
if you need a photo let me know

thinking about it after looking for a blade
this maybe a bit of a Frankenstein
the blade bolts is like this setup
https://www.outdoorking-forum.com.au/index.p...th=1_17_278_279_281&products_id=1606

yet it probably looked more like this in it original condition
https://www.outdoorking-forum.com.au/index.p...th=1_17_278_279_281&products_id=1605

anyway

Thanks people I do appreciate any suggestion that may help smile





If it ain't Broke Don't Fix it...
Sometimes I wish I'd listen to myself