Fible,
The reason for the vibration is either you have throw a blade or part of it off the blade plate. This will cause that problem.

The carby when you have a look at it where the float sits on is a couple of holes and one has a brass seat in it that is where the needle goes.

If you require information e-mail me on support@copepl.com.au and I will forward you information on the carby to assemble it correctly.

Regards,
Bruce

[This message has been edited by Bruce (edited 10-02-2002).]

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.