LarryAsh,
I want you to have a look at a couple of things.

1. Check the fuel line hose that it does not have any pin holes in it. Also make sure that the line has not got sticky (when you squeeze the line together it does not seperate)this will reduce the fuel flow.

2. Check the fuel filter in the tank and if it is slightly dirty replace DON'T TRY TO CLEAN IT.

3. Then adjust the high needle to 1 turn & low needle to one and a 1/4 turn. This is your base setting. Then you adjust the low setting till you get it to go to high speed without any hesitation then set the high speed to peek and back off 1/8 turn.

If this does not work let me know and I will get you to check a few more things.

As to a workshop manual I don't have one.

Regards,

Bruce [Linked Image]

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.