Hi Max.
On the original shaft the machined area where the rotor fits that length is 54mm, on the shaft I have the machined area is 39mm.
Cheers.
Maurice.

Attachments
20251011_062808.jpg (383.4 KB, 31 downloads)
20251011_062834.jpg (420.7 KB, 31 downloads)
20251011_062849.jpg (320.54 KB, 30 downloads)
20251011_062913.jpg (224.26 KB, 30 downloads)
20251011_062930.jpg (509.5 KB, 30 downloads)
20251011_062951.jpg (468.96 KB, 30 downloads)