I attempted to remove this stuck bearing with a two pronged puller as it wasn't spinning. It has resulted in a very loose partially damaged unit still stuck. Any suggestions how it should be removed? I have soaked it in WD40 to leave overnight. I should have just sprayed some sort of lubricant in hindsight as it's spinning again after the spray, but now has too much play. What is the best thing to use to lube these? A spray of lithium grease, silicone spray/lube, or just plain oil?
Ahh, if only victa had kept producing the thumblatch catcher series, they would be in better shape today!
