Hello Max I remember your recent sermon on had to rework a coil, and I was bewildered....... thinking, gee I'll never have to do that. I set multimeter on 20k ohms, and tested coil, got reading 3.84 so coil should be OK..... The guy soldered a piece of 3 core electrical wire as the plug lead.... plenty of copper.... I should have more EI modules.. to test. And I tried to check the flywheel air gap, a bit tricky through that little window hole. I soldered the wires together , instead of a piece of bandaid. But people use what they got..... But I'll do what you said. Thanks speedy
........................Keep your blades sharp......................
