G'day N1KK0 , looks a better height now but is difficult to see the exact height because of the angle the images are taken from.
It may be worth marking the base on one side (doesn't matter where ,Left ,Right or rear) get a texta or chalk or scratch a line level with the lower edge of one blade then spin the motor 180 degrees and check the height of the other blade on the line drawn previously ,I usually check every mower and then use a big shifter on the end of one blade to bend the blade to match the other blades height if there is a variance.
Sometimes the difference in height of the 2 blades is about a quarter of an inch.
