Originally Posted by Greg Panazzolo
G'day all.

I was gifted a Rover Thoroughbred 16" reel mower a few weeks back. It was running, but it hasn't seen a lot of love over the years, so I figured I'd give it a good clean up and replace some bits and pieces.

The engine is a Briggs & Stratton 80202-0839-01 (3 horsepower). I discovered that the HT lead to the spark plug had been snapped where it attaches to the coil, and had then been 'siliconed' back into place. I was originally going to replace the coil and retain the breaker/points ignition system, but figured it might be easier (and cheaper) to upgrade the ignition and get rid of the need for the points.

I am trying to work out exactly which part I will need to replace the original coil, but I am having no luck tracking down a part number. The part number I have for the original coil is 298502.

Any help would be much appreciated.

Greg

Here is a link to the new COIL CLICK HERE

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.