Hi Dan,
This is going on a sidepull from memory and this coil from what I see requires an ignition module to get spark. Did your motor have a module fitted, most did but some of the later ones had the electronic coil. I will check it out in the morning to see which wires need to be connected. I have to pull the flywheel off a motor in the morning and after cleaning up and finding new homes for everything I have to go looking for my puller. At a guess I would think the green wires connect to the black wire from the coil with the round connector. These can be connected to one of the coil mounting screws. The other wires are then connected together

Last edited by NormK; 12/11/20 08:17 PM.