Lockwiring examples

A couple of recent minor jobs I've done, where lockwiring was indicated.

Securing battery isolator
As the ute is not in regular use, I've fitted a battery isolator [~$10, Jaycar Electronics] to it.
Had to fit it to the +ve terminal, due to space issues.
The clamp type design looked less than secure to me, as this is a 'rough road use' car.

Solution: run a loop of locking wire, through an existing hole in the isolator 'post' side, and twist it up.

[Linked Image]

Securing CB antenna
This was done with the intention of securing the antenna and base against unscrewing - either from rough road vibration, or casual 'hydraulic individuals'. Hydraulic? The buggers will lift anything they can, given the opportunity. mad

[Linked Image]

[Linked Image]

There are a few tricks to drilling the holes in this situation, which I won't go into just now.
And the twisting is best done using a pair of 'lockwiring pliers', like these ones. Can be had for <$30, via the Bay of Fleas.

[Linked Image]

Last edited by Gadge; 28/06/20 05:49 AM.
Cheers,
Gadge

"ODK Mods can explain it to you, but they can't understand it for you..."

"Crazy can be medicated, ignorance can be educated - but there is no cure for stupid..."