OutdoorKing Repair Forum Forums Collectors Corner Cylinder Restoring Scott bonnar 19 ( Bonmow)

Hello has anyone out have parts for the Scott Bonnar 19 (Bonmow) 3g villier (2stroke) or know where I can source parts from currently chasing a fuel tank,carby set up and throttle control for the 3g villier aswell as a catcher for the bonmow it's self (14")

I have a Bonmow 19 with the catcher, I could post some photos of the catcher if that is of help, alternatively I could probably knock up a drawing on CAD for you.

Regards Geoff.

Hello Geoff wow if you could knock up a drawing on CAD that would be awsome my missus is a sheet metalist by trade so she could knock one up. the plan was to find an old one to replicate, but a drawing would do!!.. I've only ever restored 45's this is my first Bonmow. Your an absolute legend mate!! 👍👍

cobja, sorry took so long have done the drawing of the end plates and body sheet yet to do the brackets and other little bits and pieces.

Hope this has worked if not will try again.

Geoff.

Hi Geoff, I'm restoring a Bonmow 19 but need a catcher. I see you posted some drawings but wanted to see if you had a complete drawing. Thanks for the drawing you already posted as it will give me a starting point. Thanks Chris